Raspbian命令行连接WiFi网络
- 1. 源由
- 2. 环境
- 3. 信号
- 4. 连接
- 5. 检查
- 6. 断开
1. 源由
“懒人”多福，是什么原因，大家知道不，哈哈。
如果大家关注过之前《Ardupilot开源代码之Rover上路计划》，为了笔记本电脑在不断网的情况下进行配置树莓派，通常直接将网线连过去。
为了省去连网线这个步骤，就直接用一个usb无线网卡连接笔记本连接的路由器。
2. 环境
看了这个环境，大家要问：
- 树莓派不是自带了一个无线嘛，你直接连这个WiFi或者让这个WiFi连笔记本的路由器不就好了嘛？
那是因为装了伴机电脑，用作AP了。
- 上面不是有个VPN呢，为啥不用这个？
确实有VPN，但是4G卡没有插，也不是一直开着4G的。
所以就另外插了一个小的USBWiFi网卡，这个就是偷懒的方法
$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.201 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 2408:8240:610:9d30:e301:92a8:f296:4a2c prefixlen 64 scopeid 0x0<global>
inet6 fe80::e6a4:f90a:cb72:9166 prefixlen 64 scopeid 0x20<link>
ether b8:27:eb:f3:69:a6 txqueuelen 1000 (Ethernet)
RX packets 14578 bytes 2794676 (2.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 63410 bytes 53220714 (50.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 3727 bytes 807790 (788.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3727 bytes 807790 (788.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.0.2.100 netmask 255.255.255.0 broadcast 10.0.2.255
inet6 fe80::e294:8cc7:c0e0:dc9e prefixlen 64 scopeid 0x20<link>
ether b8:27:eb:a6:3c:f3 txqueuelen 1000 (Ethernet)
RX packets 672 bytes 81754 (79.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 18636 bytes 18470468 (17.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan1: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether de:70:66:73:d0:07 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
zt44xhvvrc: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 2800
inet 172.24.161.33 netmask 255.255.0.0 broadcast 172.24.255.255
inet6 fe80::4c84:edff:fe49:df6 prefixlen 64 scopeid 0x20<link>
ether 4e:84:ed:49:0d:f6 txqueuelen 1000 (Ethernet)
RX packets 99 bytes 7899 (7.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 108 bytes 17153 (16.7 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
3. 信号
$ nmcli dev wifi list
IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
* B8:27:EB:A6:3C:F3 rpanion Infra 1 0 Mbit/s 0 ____ WPA1 WPA2
IN-USE BSSID SSID MODE CHAN RATE SIGNAL BARS SECURITY
B8:F8:83:6E:16:9F AutoConnect Infra 1 405 Mbit/s 100 ▂▄▆█ WPA1 WPA2
3E:06:A7:46:A8:B0 -- Infra 6 195 Mbit/s 67 ▂▄▆_ WPA1 WPA2
3C:06:A7:56:A8:B0 402 Infra 6 195 Mbit/s 67 ▂▄▆_ WPA1 WPA2
46:FB:5A:1F:7B:DC CMCC_Share Infra 9 130 Mbit/s 67 ▂▄▆_ --
46:FB:5A:2F:7B:DC SSID3 Infra 9 130 Mbit/s 64 ▂▄▆_ WPA1 WPA2
44:FB:5A:3F:7B:DC CMCC-e33Q Infra 9 130 Mbit/s 60 ▂▄▆_ WPA1 WPA2
80:7E:B4:D9:E9:11 SJPSTAR Infra 11 130 Mbit/s 60 ▂▄▆_ WPA1 WPA2
48:CA:C6:9F:0B:52 206 Infra 11 130 Mbit/s 57 ▂▄▆_ WPA1 WPA2
4A:CA:C6:BF:0B:52 -- Infra 11 130 Mbit/s 54 ▂▄__ WPA2
84:65:69:D9:F4:6D -- Infra 1 130 Mbit/s 47 ▂▄__ --
8C:A6:DF:2D:E2:E6 zjt Infra 6 405 Mbit/s 47 ▂▄__ WPA1 WPA2
60:3A:7C:77:22:F1 suncheng Infra 6 405 Mbit/s 47 ▂▄__ WPA1 WPA2
62:3A:7C:27:22:F1 -- Infra 6 405 Mbit/s 47 ▂▄__ WPA1 WPA2
F6:6D:2F:20:E0:39 -- Infra 6 405 Mbit/s 47 ▂▄__ WPA1 WPA2
44:F9:71:B2:FD:EB Qch001 Infra 6 405 Mbit/s 47 ▂▄__ WPA1 WPA2
F4:6D:2F:30:E0:39 Suzuki Infra 6 405 Mbit/s 47 ▂▄__ WPA1 WPA2
14:B8:37:8F:A0:A8 ChinaNet-xinu Infra 13 130 Mbit/s 47 ▂▄__ WPA1
02:CB:66:CE:29:C2 ABCDE Infra 1 130 Mbit/s 44 ▂▄__ WPA2
02:CB:66:CE:29:D0 ABCDE_Wi-Fi5 Infra 1 130 Mbit/s 40 ▂▄__ WPA2
C8:BF:4C:77:9F:8D Xiaomi_FB33 Infra 1 540 Mbit/s 34 ▂▄__ WPA2 WPA3
C6:1A:3A:1E:F9:9F suncheng Infra 6 405 Mbit/s 34 ▂▄__ WPA1 WPA2
9C:9D:7E:EA:FB:BB 401 Infra 9 130 Mbit/s 34 ▂▄__ WPA1 WPA2
54:A7:03:A3:B5:C7 502 Infra 11 270 Mbit/s 34 ▂▄__ WPA1 WPA2
E0:5D:54:BC:2E:0B 312317 Infra 11 130 Mbit/s 34 ▂▄__ WPA2
B0:30:55:2A:56:0E CMCC-302 Infra 1 270 Mbit/s 30 ▂___ WPA1 WPA2
A4:39:B3:0B:16:47 Xiaomi_FB33 Infra 1 130 Mbit/s 30 ▂___ WPA2 WPA3
84:65:69:D9:F4:6F 202 Infra 1 130 Mbit/s 30 ▂___ WPA1 WPA2
EC:6C:B5:25:F8:AE CMCC-dQ7D Infra 8 130 Mbit/s 30 ▂___ WPA1 WPA2
CE:BF:4C:77:9F:8D -- Infra 1 540 Mbit/s 27 ▂___ --
24:CF:24:FE:E3:37 Xiaomi_FB33 Infra 1 130 Mbit/s 27 ▂___ WPA2 WPA3
B8:27:EB:A6:3C:F3 rpanion Infra 1 65 Mbit/s 27 ▂___ WPA1
E0:5D:54:56:FC:97 招珍 Infra 6 270 Mbit/s 27 ▂___ WPA1 WPA2
82:37:07:11:25:5D 茉莉家 Infra 6 130 Mbit/s 27 ▂___ WPA2
2E:D1:27:84:97:A5 -- Infra 11 130 Mbit/s 27 ▂___ --
14:57:9F:09:16:60 ChinaNet-HjdH Infra 13 130 Mbit/s 27 ▂___ WPA1 WPA2
38:16:72:CD:EB:A8 CMCC-Js65 Infra 4 130 Mbit/s 24 ▂___ WPA1 WPA2
68:FE:DA:9E:C2:CD ChinaNet-v2JP Infra 13 130 Mbit/s 24 ▂___ WPA1
8C:1A:50:0B:2D:A9 CMCC-xwm6 Infra 6 130 Mbit/s 20 ▂___ WPA1 WPA2
4. 连接
$ nmcli --ask dev wifi connect "AutoConnect" password "password" ifname wlan1
Device 'wlan1' successfully activated with '4b0a9e71-ce2f-4a40-82b6-938ceaf876ff'.
5. 检查
拔掉网线后检查个网络状态。
$ nmcli dev status
DEVICE TYPE STATE CONNECTION
wlan0 wifi connected WiFiAP
wlan1 wifi connected AutoConnect
zt44xhvvrc tun connected (externally) zt44xhvvrc
p2p-dev-wlan0 wifi-p2p disconnected --
p2p-dev-wlan1 wifi-p2p disconnected --
eth0 ethernet unavailable --
lo loopback unmanaged --
6. 断开
$ nmcli dev disconnect wlan1
